Well, we wrapped it up on Friday. The client came to town and approved our pull design in natural cherry rather than the burl we proposed originally. It was the perfect choice as the burl pull looked 'mushy' against the burl veneer of the drawer faces. The polished cherry stands out without drawing too much attention, the perfect thing that hardware should do. This was a very interesting adaptation of a famous designer's design; we kept the original classic concept yet the client was able to add her vision to the process and in my opinion improve on the original shown at the bottom of the original post.
The finished desk
Close up of the corner showing the bubinga/walnut edge detail and drawer borders, as well as the fine leg turnings, pulls and finish by Will.
Since this desk will be used in a home office, the center drawer is given over to a keyboard flip down and mouse nest.
3/8/09 After being distracted for a bit by the Big Walnut Slabs and the new doors in the posts below, we got back on track on the desk this week. Will finished the small drawers Friday but we still have to work out the flip down front for the center keyboard drawer and build the shelf for the computer cpu to sit on. Also, as yet, the base is not glued up, awaiting final approval of the details, which we received today. The edge inlay on the top is complete and the top is ready for final sanding and finishing. It's looking like it's going to be another good one .... Click the photos to enlarge them ...
Installing the bubinga and walnut edge inlay with masking tape, our favorite handy clamp. First we put the bubinga on flush and then routed an 1/8 x 1/8" rabbet for the walnut. The walnut is long grain over the length of the top and cut across the width of the board on the ends to allow it to expand and contract with the top. Check the original post for more detail and background.
The finished edge inlay
The finished desk
Close up of the corner showing the bubinga/walnut edge detail and drawer borders, as well as the fine leg turnings, pulls and finish by Will.
Since this desk will be used in a home office, the center drawer is given over to a keyboard flip down and mouse nest.
3/8/09 After being distracted for a bit by the Big Walnut Slabs and the new doors in the posts below, we got back on track on the desk this week. Will finished the small drawers Friday but we still have to work out the flip down front for the center keyboard drawer and build the shelf for the computer cpu to sit on. Also, as yet, the base is not glued up, awaiting final approval of the details, which we received today. The edge inlay on the top is complete and the top is ready for final sanding and finishing. It's looking like it's going to be another good one .... Click the photos to enlarge them ...
Installing the bubinga and walnut edge inlay with masking tape, our favorite handy clamp. First we put the bubinga on flush and then routed an 1/8 x 1/8" rabbet for the walnut. The walnut is long grain over the length of the top and cut across the width of the board on the ends to allow it to expand and contract with the top. Check the original post for more detail and background.
The finished edge inlay