a little custom cnc work

we did a little custom cnc work for our friend bill laberge recently. he designed a table with a 2.75" thick edge, cut on a 60 degree angle ... we had a bit that would work, but it was too small to do the work efficiently, so for a moment, we considered alternate methods ... bandsaw it with circle jig? different angle like 45 degrees? in the end, trevor found a larger 60 degree bit and the cuts were faster, very smooth and exact. bill glued up the apron blanks with the grain running parallel to the table top to minimize the effects of seasonal movement. the table has four 22" leaves. (wow...big one), trevor cut and beveled the leaves to length and bill cut the leaf apron edges on his tablesaw ... i'll try to wrangle a finished photo when it's finished ... i saw it mostly assembled last week and it looked pretty cool. cilck the photos to enlarge them ...
stepping cuts had to be made ahead of time to allow room for the collett that holds the bit
in the middle is the top mated with the apron piece .. very smooth and precise ...